Electric and manual tube forming, inside/outside threading, Bombay screw threading, annealing and Italian-type argon pipe soldering.
assets/img/products/AI-0XX/ (named 2.jpg, 3.jpg…) — see the README for details.
Motorised tube-forming machine with regulated RPM for converting strip into round pipe for bangles, chains and hollow jewellery.
| Speed | 0 – 50 RPM, regulated |
|---|---|
| Power supply | 1 HP DC drive, 1 phase |
| Machine dimension | 75 × 70 × 125 cm |
| Net weight | Approx. 140 kg |
| Includes | Die & spindle set (as ordered) |
Continuous wire-threading machine with multi-speed controller and high-speed rollers for twisted and threaded wire patterns.
| Motor | 1 HP |
|---|---|
| Speed control | Multi-speed controller |
| Roller material | High-speed steel |
| Power supply | 220 V |
| Machine size / weight | 53 × 53 × 100 cm / approx. 125 kg |
Bench machine for threading and patterning the inside of pipes and hollow bangles with automatic reverse/forward.
| Motor | 200 V, multi-speed |
|---|---|
| Reverse / forward | Automatic |
| Machine size | 38 × 20 × 33 cm |
| Net weight | Approx. 15 kg |
| Power supply | 220 V, 1 phase |
Bench machine for outside threading and design rolling on pipes and wire with multi-speed control.
| Motor | 200 V, multi-speed |
|---|---|
| Reverse / forward | Automatic |
| Machine size | 38 × 20 × 33 cm |
| Net weight | Approx. 15 kg |
| Power supply | 220 V, 1 phase |
Screw-threading machine for earring and pendant screw posts and nuts, with die set for Bombay-type threads.
| Thread type | Bombay screw (standard sizes) |
|---|---|
| Operation | Motorised, foot switch |
| Die set | Included, replaceable |
| Power supply | 220 V, 1 phase |
| Net weight | Approx. 25 kg |
Continuous annealing (heat-treatment) machine for softening drawn pipe and wire between passes. Bench-frame construction with controlled heating.
| Application | Annealing of pipe & wire |
|---|---|
| Heating | Electric, controlled |
| Frame | Steel fabricated bench |
| Power supply | 220 V, 1 phase |
| Length | As per requirement |
Pipe-making machine with integrated Italian-type argon soldering for continuous seam-soldered tube from strip.
| Pipe diameter | 4 – 14 mm |
|---|---|
| Soldering | Italian argon soldering, 0.35 mm |
| Power supply | 1 HP / 0.75 kW DC drive |
| Machine dimension | 70 × 45 × 100 cm |
| Net weight | Approx. 165 kg |
Hand-wheel operated tube-forming machine — a low-cost, reliable option for small workshops making pipe for bangles.
| Operation | Manual, hand wheel |
|---|---|
| Die & spindle | Set included |
| Body | Cast iron & steel |
| Net weight | Approx. 60 kg |
| Maintenance | Minimal |
Bangle pipe / tube spring cutting machine with HSS blade and sliding spindle for square, clean cuts.
| Blade | HSS, 80 mm, 2800 RPM |
|---|---|
| Spindle sizes | 19 – 75 mm (any one) |
| Power supply | 0.5 HP, 230 V |
| Machine dimension | 46 × 25 × 30 cm |
| Net weight | Approx. 35 kg |