Vacuum buffing machines, sand blasting, steam & ultrasonic cleaners, vibratory finishers, electro/magnetic polishers and centrifugal dryers.
assets/img/products/AI-0XX/ (named 2.jpg, 3.jpg…) — see the README for details.
Single-station buffing machine with vacuum dust collection, steel-fabricated body and enclosed hood for clean, dust-free polishing.
| Polisher motor | 0.75 HP / 0.56 kW, 2800 RPM |
|---|---|
| Vacuum motor | 0.75 HP / 0.56 kW, 2800 RPM |
| Body | Steel fabricated |
| Machine dimension | 100 × 75 × 125 cm |
| Net weight | Approx. 125 kg |
| Power supply | 1 phase 220 V or 3 phase 440 V |
Two-station buffing machine with a single high-capacity vacuum motor and twin enclosed hoods for two operators.
| Polisher motors | 2 × 0.75 HP / 0.56 kW, 2800 RPM |
|---|---|
| Vacuum motor | 1.0 HP / 0.75 kW, 2800 RPM |
| Body | Steel fabricated |
| Machine dimension | 145 × 75 × 125 cm |
| Net weight | Approx. 176 kg |
| Power supply | 1 phase 220 V or 3 phase 440 V |
Enclosed sand-blasting cabinet with foot switch, viewing window and dust collector for matte and satin finishing of castings.
| Cabinet | Steel, powder coated, glass window |
|---|---|
| Gun | Pressure-feed, ceramic nozzle |
| Air requirement | 6 – 8 bar (compressor separate) |
| Dust collection | Built-in |
| Net weight | Approx. 70 kg |
SS-body steam cleaning machine with auto water-level sensor and pressure gauge for final cleaning of finished jewellery.
| Capacity | 9 / 12 L |
|---|---|
| Steam pressure | 100 psi |
| Power consumption | 3.5 kW |
| Water level | Auto sensor |
| Power supply | 230 V AC, 1 phase |
Stainless-steel ultrasonic cleaning tank with digital timer and heater for removing polishing compound and dirt.
| Capacity | 6 / 9 / 12 / 15 L |
|---|---|
| Frequency | 33 kHz ± 5 % |
| Power | 600 W – 1.8 kW |
| Body | SS 202 / 20 SWG |
| Power supply | 230 V AC, 1 phase |
Turbo vibratory finisher with whole-PU bowl for mass finishing and pre-polishing of castings and chains.
| Capacity | 3 / 5 / 10 kg (material) |
|---|---|
| Motor | 0.75 – 2 HP, 2800 RPM |
| Bowl | Whole PU, 370 – 610 mm OD |
| Power supply | 230 V |
| Net weight | 70 – 110 kg |
Stainless-steel vibrator polisher with PP / PU tub for pin and ball media polishing of small jewellery lots.
| Tub size | 22 × 10 × 10 to 55 × 25 × 25 cm |
|---|---|
| Jewellery capacity | 0.8 – 10 kg |
| Media required | 7 – 60 kg |
| Motor | 0.12 – 1.0 HP, 2880 RPM |
| Power supply | 1 phase 220 V or 3 phase 440 V |
Electro-polishing unit with rectifier and SS tank for bright, uniform finish on gold and silver without mechanical polishing.
| Rectifier | 0 – 15 V / 30 A DC |
|---|---|
| Tank | SS, with heater & timer |
| Application | Gold, silver, brass |
| Power supply | 220 V, 1 phase |
| Net weight | Approx. 25 kg |
Magnetic pin polisher with digital timer, forward/reverse and SS body for polishing intricate and hollow pieces.
| Capacity | 0.5 / 1 / 1.5 kg |
|---|---|
| Media | 0.4 – 1.0 kg SS magnetic pins |
| Motor | 0.5 – 1 HP, forward / reverse |
| Machine dimension | 37 × 37 × 36 cm |
| Net weight | 25 – 35 kg |
Centrifugal jewellery dryer with SS body and heater for quick drying after ultrasonic or steam cleaning.
| Capacity | 1 / 3 / 5 / 10 kg |
|---|---|
| Motor | 0.12 – 0.5 HP |
| Heater | 1100 – 2000 W |
| Body | SS |
| Net weight | 31 – 62 kg |