Hydraulic presses from 3 to 200 ton, a manual fly press, and dedicated ring/bangle sizing & expander machines.
assets/img/products/AI-0XX/ (named 2.jpg, 3.jpg…) — see the README for details.
H-frame hydraulic press for coin embossing, bar cutting and die work. Available from 25 to 200 ton in manual and semi-automatic versions.
| Capacity | 30 / 40 / 60 / 100 / 150 ton (others on request) |
|---|---|
| Piston size | 80 – 220 mm |
| Stroke | 100 – 125 mm |
| Working area | 250 × 250 to 450 × 450 mm |
| Motor | 2 – 7.5 HP, 3 phase |
| Coin emboss capacity | Gold up to 100 g (100 T) |
High-speed hydraulic die-cutting press for jewellery cutting and embossing dies. Foot-switch operation; automatic strip-feeder version available.
| Capacity | 3 / 5 / 10 / 20 ton |
|---|---|
| Working speed | 80 – 100 strokes/min |
| Stroke | 75 – 100 mm |
| Working area | 200 × 200 mm |
| Motor | 2 – 5 HP |
| Oil capacity | 40 – 70 L |
Manual fly press with cast-iron frame and balanced ball handle for die cutting, embossing, stamping and forming of gold and silver sheet.
| Sizes | No. 1, No. 2, No. 3 (No. 4 & 5 on request) |
|---|---|
| Screw diameter | 44.45 / 44.45 / 50.8 mm |
| Base to guide | 127 / 146 / 171 mm |
| Net weight | 80 / 110 / 150 kg |
| Frame | Graded cast iron |
Manual sizing press with collet set for accurate ring and bangle sizing without damage to the finished surface.
| Type | Manual, lever operated |
|---|---|
| Application | Ring & bangle sizing |
| Collets | Multi-size set included |
| Machine dimension | 30 × 25 × 45 cm |
| Net weight | Approx. 35 kg |
Bangle and ring enlarger with stepped, hardened mandrel and 4-arm handle for smooth, uniform expansion.
| Type | Stepped mandrel, hand operated |
|---|---|
| Range | Bangle 2.0" – 2.8"; ring sizes |
| Mandrel | Hardened & ground steel |
| Machine dimension | 23 × 23 × 50 cm |
| Net weight | Approx. 21 kg |