Search by name or SKU, or filter by category. Every listing shows the same specification table as our printed catalogue.
No products match your search. Try a different keyword or SKU, or ask us directly.
Precision diamond and carbide cutting tools for CNC bangle, ring and pendant faceting machines.
| Tool type | Flat, V, round, circle & engraving |
|---|---|
| Cutting material | Natural / synthetic diamond, PCD |
| Shank diameter | 6/8/10/12 mm (custom) |
Hardened steel dull pins for matte (dull) finishing on faceting and texturing machines.
| Material | Hardened alloy steel / carbide tip |
|---|---|
| Profiles | Round, pointed, flat, satin |
| Shank sizes | 3 mm – 12 mm |
Tungsten-carbide and PCD inserts and holders for heavy-duty faceting and turning applications.
| Insert material | Tungsten carbide / PCD |
|---|---|
| Holder | Hardened steel, ground square shank |
| Regrinding | Available at factory |
Diamond-tipped hand cutting tools for hand-piece and micro-motor faceting on rings, bangles and chains.
| Tip | Natural diamond / PCD |
|---|---|
| Head profiles | Flat, V, half-round, ball |
| Shank | 2.35 mm / 3.0 mm |
Compact bench-top micro-motor unit with foot control for polishing, engraving, drilling and fine faceting.
| Speed range | 0 – 35,000 RPM |
|---|---|
| Control | Foot pedal + dial |
| Power supply | 220 V, 1 phase |
Diamond tools manufactured to suit Posalux-type bright-cutting machines, for a consistent mirror finish.
| Diamond | Natural, single-crystal |
|---|---|
| Angles | Standard 90° / 120° or custom |
| Re-lapping | Available |
Specialised diamond and carbide tooling for watch-case and heavy-section turning.
| Tool type | Turning, facing, chamfer |
|---|---|
| Shank | 10 mm, 12 mm, 16 mm |
| Custom profiles | Available on drawing |
Diamond wire-drawing dies in brass casings for gold, silver and alloy wire, all mm/gauge sizes.
| Die material | Natural / synthetic diamond |
|---|---|
| Size range | 0.10 – 5.0 mm (gauge 15–40) |
| Re-polishing | Available |
Round button-type diamond tools for cup, dome and dot faceting on bangles and earrings.
| Tip | Diamond / PCD |
|---|---|
| Diameters | 3 mm – 12 mm |
| Finish | Mirror lapped |
Precision disc-type cutters for lining, jalebi and circle patterns on faceting machines.
| Material | Hardened steel / carbide edge |
|---|---|
| Disc diameter | 20 mm – 60 mm |
| Pattern | Lining, circle, jalebi, wave |
Heavy cast-iron faceting machine for bright cutting on bangles, rings and pendants.
| Motor | 0.5 HP / 0.37 kW, 2800 RPM |
|---|---|
| Body | Graded cast iron |
| Net weight | Approx. 145 kg |
Fully enclosed 9-axis CNC machine for automated bangle, ring and pendant faceting.
| Axes | 9 (programmable) |
|---|---|
| Control | PC / touch-screen |
| Work range | Bangle 45 – 80 mm |
Bench lathe for inside–outside turning of bangles and rings with swivel table.
| Motor | 1.0 HP / 0.75 kW, 2800 RPM |
|---|---|
| Features | Quick-centring tool post, 180° swivel |
| Net weight | Approx. 65 kg |
Heavy-duty motorised double-head rolling mill with flat and grooved rolls for sheet and wire.
| Roll size | 152 × 76 mm (6"×3") |
|---|---|
| Wire grooves | 0.75 – 10 mm |
| Power | 2 HP / 1.5 kW, 1 phase |
Motorised single-head rolling mill with side wheel; ideal for medium workshops rolling daily.
| Roll size | 127 × 63.5 mm (5"×2.5") |
|---|---|
| Wire grooves | 0.75 – 9 mm |
| Power | 1.5 HP / 1.1 kW, 1 phase |
Compact motorised 3" rolling mill with reduction gear box for small workshops.
| Roll size | 76 × 41 mm (3"×1.6") |
|---|---|
| Rolling speed | 4.4 m/min |
| Power | 1 HP / 0.75 kW, 220 V |
Hand-operated mini rolling mill with combination flat/groove rolls, ideal for mobile goldsmiths.
| Roll size | 76×41 mm / 89×51 mm |
|---|---|
| Gear ratio | 3.15 : 1 |
| Net weight | Approx. 16 – 18 kg |
Electric strip cutting machine with hardened HSS circular blades for accurate strips.
| Cutting width | 4 – 70 mm |
|---|---|
| Cutting speed | 8.2 m/min |
| Power | 1 HP / 0.75 kW, 220 V |
Single-pass wire drawing machine with clutch reverse/forward through diamond dies.
| Wire reduction | 8 SWG to 42 SWG |
|---|---|
| Drawing speed | 30 RPM / 9.66 m/min |
| Power | 1 HP / 0.75 kW, 220 V |
Electric draw bench for resizing and reshaping soldered hollow pipes through dies.
| Drawing length | 4 ft – 15 ft |
|---|---|
| Drawing diameter | 6 – 15 mm |
| Power | 1.5 – 15 HP (as per length) |
Hand-operated strip cutter with hardened blades for slitting thin sheet at the bench.
| Cutting width | 4 – 30 mm |
|---|---|
| Operation | Manual, geared handle |
| Net weight | Approx. 17 kg |
H-frame hydraulic press for coin embossing, bar cutting and die work, 25–200 ton.
| Capacity | 30/40/60/100/150 ton |
|---|---|
| Motor | 2 – 7.5 HP, 3 phase |
| Coin emboss | Gold up to 100 g (100 T) |
High-speed hydraulic die-cutting press for jewellery cutting and embossing dies.
| Capacity | 3/5/10/20 ton |
|---|---|
| Working speed | 80 – 100 strokes/min |
| Motor | 2 – 5 HP |
Manual fly press with cast-iron frame for die cutting, embossing, stamping and forming.
| Sizes | No. 1, 2, 3 (4 & 5 on request) |
|---|---|
| Net weight | 80 / 110 / 150 kg |
| Frame | Graded cast iron |
Manual sizing press with collet set for accurate ring and bangle sizing.
| Type | Manual, lever operated |
|---|---|
| Collets | Multi-size set included |
| Net weight | Approx. 35 kg |
Bangle and ring enlarger with stepped, hardened mandrel and 4-arm handle.
| Range | Bangle 2.0" – 2.8"; ring sizes |
|---|---|
| Mandrel | Hardened & ground steel |
| Net weight | Approx. 21 kg |
Motorised tube-forming machine with regulated RPM converting strip into round pipe.
| Speed | 0 – 50 RPM, regulated |
|---|---|
| Power | 1 HP DC drive, 1 phase |
| Net weight | Approx. 140 kg |
Continuous wire-threading machine with multi-speed controller for twisted wire patterns.
| Motor | 1 HP |
|---|---|
| Roller material | High-speed steel |
| Net weight | Approx. 125 kg |
Bench machine for threading the inside of pipes and hollow bangles.
| Motor | 200 V, multi-speed |
|---|---|
| Reverse/forward | Automatic |
| Net weight | Approx. 15 kg |
Bench machine for outside threading and design rolling on pipes and wire.
| Motor | 200 V, multi-speed |
|---|---|
| Reverse/forward | Automatic |
| Net weight | Approx. 15 kg |
Screw-threading machine for earring and pendant screw posts and nuts.
| Thread type | Bombay screw (standard sizes) |
|---|---|
| Operation | Motorised, foot switch |
| Net weight | Approx. 25 kg |
Continuous annealing machine for softening drawn pipe and wire between passes.
| Application | Annealing of pipe & wire |
|---|---|
| Heating | Electric, controlled |
| Frame | Steel fabricated bench |
Pipe-making machine with integrated Italian-type argon soldering.
| Pipe diameter | 4 – 14 mm |
|---|---|
| Soldering | Italian argon, 0.35 mm |
| Net weight | Approx. 165 kg |
Hand-wheel operated tube-forming machine, low-cost option for small workshops.
| Operation | Manual, hand wheel |
|---|---|
| Body | Cast iron & steel |
| Net weight | Approx. 60 kg |
Bangle pipe / tube spring cutting machine with HSS blade and sliding spindle.
| Blade | HSS, 80 mm, 2800 RPM |
|---|---|
| Spindle sizes | 19 – 75 mm |
| Net weight | Approx. 35 kg |
Hand-wheel bangle grooving machine with gear drive for cutting grooves and designs.
| Operation | Manual, geared hand wheel |
|---|---|
| Body | Cast iron |
| Net weight | Approx. 17 kg |
Double-head automatic chain cutting machine with digital control, two patterns at once.
| Heads | 2, independently adjustable |
|---|---|
| Chain range | 0.5 – 6 mm |
| Net weight | Approx. 120 kg |
Motorised bangle grooving machine with interchangeable design rolls for high-volume production.
| Motor | 0.5 HP, 1 phase |
|---|---|
| Safety | Emergency stop |
| Net weight | Approx. 45 kg |
Pneumatic / motorised chain hammering machine for flattening and texturing chain links.
| Operation | Motorised with die set |
|---|---|
| Stroke rate | Adjustable |
| Net weight | Approx. 70 kg |
Automatic ball-making machine for hollow and solid beads from wire or strip.
| Ball sizes | 2 – 12 mm (die dependent) |
|---|---|
| Operation | Motorised, cam driven |
| Net weight | Approx. 90 kg |
Single-head automatic chain faceting machine for rope, curb and box chains.
| Heads | 1 |
|---|---|
| Chain range | 0.5 – 6 mm |
| Net weight | Approx. 80 kg |
Digitally controlled burnout furnace with ceramic-fibre chamber for wax elimination.
| Chamber size | 10×10×10" (6",12",18" avail.) |
|---|---|
| Max temperature | 1000 °C |
| Net weight | Approx. 85 kg |
Induction melting furnace for fast, clean melting of gold, silver and alloys.
| Capacity | 1 – 20 kg (per model) |
|---|---|
| Melting time | 2 – 5 min |
| Power | 15 – 20 kW, 3 phase |
Electric melting furnace with dual digital display and collar-type crucible.
| Capacity | 1/2/3/5 kg |
|---|---|
| Temperature | 0 – 1200 °C |
| Net weight | 9 – 30 kg |
3-in-1 vacuum casting machine with SS304 chambers and precision temperature controller.
| Max temperature | 1150 °C |
|---|---|
| Crucible capacity | 1 kg gold |
| Net weight | Approx. 105 kg |
Digital vacuum wax injector with auto-clamp for bubble-free wax patterns.
| Wax capacity | 3 kg |
|---|---|
| Temperature | 40 – 99.9 °C |
| Net weight | Approx. 30 kg |
High-pressure water jet cabinet for investment removal and piece retrieval.
| Water pressure | 40 – 110 bar |
|---|---|
| Control | Manual valve, foot switch |
| Net weight | Approx. 65 kg |
Rubber-mould vulcanizer with digital temperature control and 99-minute timer.
| Plate size | 200 × 150 mm |
|---|---|
| Max temperature | 250 °C |
| Net weight | Approx. 36 kg |
Investment (flask) removal unit with perforated basket and vibrating action.
| Flask sizes | Up to 4 × 8" |
|---|---|
| Operation | Motorised vibration |
| Net weight | Approx. 40 kg |
HHO micro brazing machine producing a clean, high-temperature flame from water.
| Flame temperature | Up to 2800 °C |
|---|---|
| Safety | Flash-back arrestor |
| Includes | Torch, nozzles, KOH electrolyte |
Single-station buffing machine with vacuum dust collection and enclosed hood.
| Polisher motor | 0.75 HP, 2800 RPM |
|---|---|
| Net weight | Approx. 125 kg |
| Power | 1φ 220 V or 3φ 440 V |
Two-station buffing machine with a single high-capacity vacuum motor.
| Polisher motors | 2 × 0.75 HP |
|---|---|
| Net weight | Approx. 176 kg |
| Power | 1φ 220 V or 3φ 440 V |
Enclosed sand-blasting cabinet for matte and satin finishing of castings.
| Cabinet | Steel, powder coated |
|---|---|
| Air requirement | 6 – 8 bar |
| Net weight | Approx. 70 kg |
SS-body steam cleaning machine with auto water-level sensor.
| Capacity | 9 / 12 L |
|---|---|
| Steam pressure | 100 psi |
| Power | 3.5 kW |
Stainless-steel ultrasonic cleaning tank with digital timer and heater.
| Capacity | 6/9/12/15 L |
|---|---|
| Frequency | 33 kHz ± 5% |
| Power | 600 W – 1.8 kW |
Turbo vibratory finisher with whole-PU bowl for mass finishing.
| Capacity | 3/5/10 kg |
|---|---|
| Motor | 0.75 – 2 HP |
| Net weight | 70 – 110 kg |
Stainless-steel vibrator polisher with PP/PU tub for pin and ball media polishing.
| Jewellery capacity | 0.8 – 10 kg |
|---|---|
| Motor | 0.12 – 1.0 HP |
| Power | 1φ 220 V or 3φ 440 V |
Electro-polishing unit with rectifier and SS tank for bright, uniform finish.
| Rectifier | 0 – 15 V / 30 A DC |
|---|---|
| Application | Gold, silver, brass |
| Net weight | Approx. 25 kg |
Magnetic pin polisher with digital timer for intricate and hollow pieces.
| Capacity | 0.5 / 1 / 1.5 kg |
|---|---|
| Motor | 0.5 – 1 HP, F/R |
| Net weight | 25 – 35 kg |
Centrifugal jewellery dryer with SS body and heater for quick drying.
| Capacity | 1/3/5/10 kg |
|---|---|
| Heater | 1100 – 2000 W |
| Net weight | 31 – 62 kg |
Three-tank gold plating unit with digital voltage/current display and heater.
| Tanks | 3 (electro-clean, gold, colour) |
|---|---|
| Output | 0 – 15 V / 20 A DC |
| Dimension | 66 × 41 × 41 cm |
Compact rhodium plating machine with transformer-based DC output.
| Output | 0 – 25 V / 20 A DC |
|---|---|
| Beaker capacity | 1000 – 3000 mL |
| Net weight | Approx. 25 kg |
View category page → Laser Cutting Coming Soon
Laser spot-welding/soldering machine with microscope and water chiller for invisible joints.
| Output power | 100 W / 200 W |
|---|---|
| Wavelength | 1064 nm |
| Requirement | 220 V, 5 kVA stabilizer, AC room |
Pulsed fibre laser marking machine for hallmarking, logos and serial numbers.
| Output power | 20 W / 30 W |
|---|---|
| Marking depth | 0.01 – 0.5 mm |
| Max speed | 12,000 mm/s |
Hardened steel side-design rollers for embossing patterns on bangle edges.
| Material | Hardened & tempered tool steel |
|---|---|
| Fit | Bangle grooving / rolling machines |
| Custom | Engraved on drawing / sample |
Spring para (paramani) dies for hollow and solid gold beads in all standard sizes.
| Sizes | 3 – 14 mm |
|---|---|
| Type | Spring die with punch |
| Packing | Boxed, size marked |
Cutting and embossing dies for earrings, tops, bali, pendants and chain patterns.
| Types | Cutting, embossing, J-tops, bali |
|---|---|
| Press | Hydraulic / fly press |
| Custom | From sample, drawing or CAD |
Hardened coin dies for hydraulic coin presses — religious motifs, logos, custom artwork.
| Coin sizes | 1 g – 100 g |
|---|---|
| Design | CNC engraved, custom artwork |
| Finish | Proof / matte |
CNC-engraved thappa (embossing) dies — floral, temple, pear and geometric patterns.
| Engraving | CNC, high relief |
|---|---|
| Application | Embossing on hydraulic / fly press |
| Design service | In-house CAD |
Sheet, wire, UV-wire and design rollers for rolling mills — hardened and ground.
| Types | Sheet, wire, UV wire, design |
|---|---|
| Fit | All standard rolling mills |
| Finish | Ground & polished |
